Chlorine Dioxide – The Chemistry Behind the Function

Chlorine Dioxide – The Chemistry Behind the Function

The Chemistry, Microbial Resistance and Importance of Appropriate Biocide Selection


Chlorine Dioxide (ClO2): The Chemistry Behind the Function

Chlorine dioxide has been used in the water treatment industry for the past century. The World Health Organisation approves ClO₂ for the disinfection of drinking water. Tristel’s proprietary ClO₂ formulation has become the go-to high-level disinfectant for non-lumened heat sensitive medical devices. Chlorine dioxide is the biocide with the broadest efficacy against microbial organisms such as bacteria, viruses, protozoa, yeasts, fungi, mycobacteria and bacterial spores.

The biocidal activity of ClO₂ is attributed to its oxidative action against microbes. This is highlighted in Table 1. The ‘OXIDATION POTENTIAL’ (Potential) of the chemical is its capability to obtain electrons from nearby molecules. The Potential of ClO₂ is lower than that of peracetic acid, hydrogen peroxide and aqueous chlorine. Importantly ClO₂ displays a higher biocidal efficacy than other biocides with higher oxidation potentials, the higher the oxidation potential of a chemical, the greater the capacity for corrosion. This means ClO₂ a more effective, but less corrosive biocide than other oxidisers.

*multiple part reductions
Table 1. Oxidant Capacity

Chlorine dioxide has a higher ‘OXIDATIVE CAPACITY’ (Capacity) than any of the other three aforementioned chemicals. The Capacity of chemicals denotes the number of electrons one molecule can accept from its surrounding molecules. In ClO₂’s case this means that it can gain five electrons from microbial species per molecule, making it a superior biocide to alternative oxidisers, which typically are only able to gain two. This enhanced effect is attributed to its two-step reduction (Figure 1).

Figure 1. The reduction of Chlorine Dioxide

Figure 1 shows the reduction of ClO₂. In the first step, ClO₂ is reduced to a chlorite ion after the acceptance of one electron. The chlorite ion then undergoes another reaction in which it is further reduced by accepting an additional four electrons and four hydrogen atoms. This two-step process allows it to sequester a higher number of electrons from microbes compared to other oxidisers. This means that chlorine dioxide will have a decreased corrosive effect on surfaces it is applied to, whilst having an enhanced ability to kill.
The reason why oxidative agents such as ClO₂ are favoured over non-oxidising disinfectants is due to their proven powerful efficacy against bacterial spores and other microorganisms within short contact times. Substances like alcohols and quaternary ammonium compounds are not sporicidal and do not provide this level of efficacy.

Chlorine dioxide kills pathogens via electron exchange, sequestering electrons from the microorganism’s vital structures such as cell walls, membranes, organelles and genetic materials, which causes a molecular imbalance leading to the microorganism’s death. Microbes cannot develop resistance to the action of ClO₂ because they are destroyed.

Figure 2 shows the reaction by which Tristel’s proprietary ClO₂ chemistry is generated. The generation of Tristel’s ClO₂ leaves no harmful by-products after use. The reaction itself generates ClO₂, sodium citrate and salt. Sodium citrate and salt are common food additives/preservatives that pose no threat to the patient, user or equipment. In addition to the primary reaction products, water is also formed.


Microbial Resistance and The Importance of Appropriate Biocide Selection

Antimicrobial resistance occurs when organisms evolve to grow in the presence of chemicals which would ordinarily kill them. Excessive and improper use of antibiotics and biocides alike, across human clinical settings and animal breeding, has led to a dramatic increase in antimicrobial resistance.

The rising prominence of antimicrobial resistance in pathogenic microorganisms has in time become a major health concern and a severe risk for patients. The role of biocides in the increase of antimicrobial resistance has in recent years been a key research area, with several studies identifying the low-level biocide discharge in biosystems such as hopsitals as a driver for selection of antimicrobial resistant organisms1. The risks of using inappropriate or sub-optimal biocides has additionally been shown to directly affect physiological traits in microbes, with studies finding for example, that exposure to sub-optimal biocides caused an increased expression of drug efflux pumps in Salmonella strains2. Mutations such as these would subsequently lead to increased antibiotic and biocidal resistance. For patient and staff safety it is imperative that the appropriate biocides are used.

Biocides such as quaternary ammonium compounds and triamines have been shown in multiple studies to contribute to the rise of antimicrobial resistance, with several resistant strains being identified, including E.coli3 and C.difficile spores4. Whereas with biocides such as ClO₂, microbial resistance is not possible5. This is due to the chemistry’s mode of action, acting as a strong oxidiser, sequestering electrons form microbial structures and attacking the cells molecular integrity. This breaks down the membrane, disrupting protein function, inhibiting RNA synthesis and killing the microbes6.

One could say that ClO₂ is a remarkable molecule. It provides the complete solution for disinfection: killing the widest range of microbes in short contact times, whilst having fewer corrosive effects on surfaces. Furthermore, using ClO₂ avoids the threat of microbial resistance.


Figure 2. Chlorine dioxide generation


1. Morrissey, I., Oggioni, M., Knight, D., Curiao, T., Coque, T., Kalkanci, A. and Martinez, J. (2014). Evaluation of Epidemiological Cut-Off Values Indicates that Biocide Resistant Subpopulations Are Uncommon in Natural Isolates of Clinically-Relevant Microorganisms. PLoS ONE, 9(1), p.e86669.
2. Whitehead, R., Overton, T., Kemp, C. and Webber, M. (2011). Exposure of Salmonella enterica Serovar Typhimurium to High Level Biocide Challenge Can Select Multidrug Resistant Mutants in a Single Step. PLoS ONE, 6(7), p.e22833.
3. Hansen, L. S., Jensen, L. B., and Sørensen, H. I. (2007). Substrate specificity of the OqxAB multidrug resistance pump in Escherichia coli and selected enteric bacteria. J. Antimicrob. Chemother. 60, 145–147.
4. Macleod-Glover N, Sadowski C. Efficacy of cleaning products for C. difficile: environmental strategies to reduce the spread of Clostridium difficile-associated diarrhea in geriatric rehabilitation. Can Fam Physician. 2010;56(5):417–423.
5. Noszticzius, Z., Wittmann, M., Kály-Kullai, K., Beregvári, Z., Kiss, I., Rosivall, L. and Szegedi, J. (2013). Chlorine Dioxide Is a Size-Selective Antimicrobial Agent. PLoS ONE, 8(11), p.e79157.
6. Block, S., Knapp, J. and Battisti, D. (2001). Disinfection, sterilization, and preservation. Philadelphia: Lippincott Williams & Wilkins, pp.215-227.


©2021 Tristel Solution Limited. All rights reserved.


Read More from Triology

  • 20 September 2022

    Destroy SARS-CoV-2 in 30 seconds with Tristel Chlorine Dioxide

    Read more
  • 20 September 2022

    Keep Your Eyes on Ophthalmology

    Read more
  • 20 September 2022

    The Importance of High-Level Disinfection on Transvaginal Ultrasound (TV) Probes

    Read more
  • 20 September 2022

    The Risk of STI Transmission Within Obstetrics and Gynaecology

    Read more
  • 20 September 2022

    Chlorine Dioxide Mode of Action on Viruses

    Read more
Sign Me Up!
We use cookies to give you the best possible experience. By continuing, you are agreeing with our cookie policy.